TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY
1.
Use a scribe to match-mark the clutch housing (4) and exposed plate surfaces to aid in assembly.
2.
Install nine torque converter mounting nuts (1) on studs (2).
3.
Install two link brackets (3) in number one clutch housing (4).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of clutch assembly is 350 lb (159
kg).
4.
Attach lifting device to two link brackets (3).
5.
Lift number one clutch housing (4) and position on
workbench.
1
6.
Remove lifting device and two link brackets (3).
4
2
3
394-1267
7.
Install two link brackets (3) in number one clutch hous-
ing (4).
8.
Attach lifting device to two link brackets (3).
9.
Lift number one clutch housing (4) and reposition
upside down on workbench.
10.
Remove lifting device and two link brackets (3).
3
4
394-1268
0373 00-2
