TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
11.
Remove 10 bolts (5) and washers (6) from number one
5
7
clutch housing (4).
6
12.
Install two lifting bolts (7) to aid in lifting.
13.
Remove planetary gear assembly (8).
14.
Remove two lifting bolts (7).
15.
Turn over planetary gear assembly (8).
8
4
394-1269
NOTE
There are three shaft assemblies of this type in carrier. The following disassembly procedure is for one shaft
assembly. The disassembly procedure for the remaining two shaft assemblies is identical.
16.
Remove four bolts (9) and plate (10).
NOTE
Remove spring pin only if inspection indicates replacement is necessary.
17.
Using pin punch and hammer, depress spring pin (16)
9
into center of shaft (15).
10
18.
Remove spring pin (16) and shaft (15).
19.
Remove spring pin (16) from shaft (15).
20.
Remove thrust washer (14).
21.
Remove bearing (13) and gear (12).
22.
Use driver and hammer to remove bearing (13) from
11
gear (12).
12
13
23.
Remove thrust washer (11).
14
15
16
394-1270
0373 00-3
