TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
44.
Remove and discard three preformed packings (45).
43
45.
Remove ring (43).
44
46.
Use suitable driver and hammer to remove bearing
45
45
(44) from cage (42).
42
394-1278
NOTE
There are three shaft assemblies in carrier. The following disassembly procedure is for one shaft assem-
bly. The disassembly procedure for the remaining two shaft assemblies is identical.
Remove spring pin only if inspection indicates replacement is necessary.
47.
Use pin punch and hammer to depress spring pin (47) into center of shaft (46).
48.
Remove spring pin (47) and shaft (46) from housing (35).
49.
Remove spring pin (47) from shaft (46).
35
50.
Remove thrust washer (48).
46
51.
Remove bearing (49) and gear (50) from housing (35).
47
52.
Use suitable driver and hammer to remove bearing
(49) from gear (50).
48 49
53.
Remove thrust washer (51).
50
51
394-1279
0373 00-8
