TM 5-3805-248-23-2
TRANSFER GEARS REPAIR - CONTINUED
0374 00
DISASSEMBLY
1.
Remove seven nuts (3), washers (5) and bolts (6) from case (9).
2.
Remove seven nuts (7) and washers (8) from studs (2) on transmission housing.
3.
Install link bracket (1) in case (9).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of transfer gears assembly is 500 lb (227 kg).
4.
Attach lifting device to case (9).
NOTE
Take care separating transfer gear assembly from transmission. If studs are damaged during removal,
replace.
5.
Use lifting device to remove case (9) and place in stand.
6.
Remove and discard preformed packing (4) from case (9).
1
9
2
78
3
6 5
4
394-1318
0374 00-2
