TM 5-3805-248-23-2
TRANSFER GEARS REPAIR - CONTINUED
0374 00
ASSEMBLY - CONTINUED
45.
Install link bracket (1) in case (9).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of transfer gear assembly is 500 lb (227 kg).
46.
Attach lifting device to link brackets (1).
47.
Install new preformed packing (4) in case (9).
48.
Position case (9) on transmission housing on studs (2).
49.
Install seven washers (8) and nuts (7).
50.
Install seven bolts (6), washers (5) and nuts (3).
51.
Remove lifting device.
52.
Remove link bracket (1).
1
9
2
78
3
6 5
4
394-1318
53.
Install rear cutting edge worklight (WP 0086 00).
54.
Install transmission oil filter (WP 0128 00).
55.
Install magnetic strainer (WP 0130 00).
56.
Install transmission oil pump suction screen (WP 0131 00).
57.
Install governor and automatic shift drive (WP 0370 00).
58.
Install transfer gears and transmission (WP 0286 00).
59.
Install scavenger pump, oil pump and manifold (WP 0375 00).
60.
Operate machine and verify correct operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0374 00-24
