TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
DISASSEMBLY
1.
Remove clip (7) from hose assembly (8) on differential assembly.
CAUTION
Wipe area clean around all connections prior to removal. Cap oil lines and plug openings after removal.
Contamination of system could result in premature failure.
NOTE
Use container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills are
cleaned up.
2.
Disconnect hose assembly (8) from carrier (10).
2
3.
Remove hose assembly (8), elbow (5) and preformed
3
packing (6) from cylinder assembly (9). Discard pre-
4
formed packing.
1
5
4.
Remove two bolts (2), washers (3) and bracket (4).
5.
Remove tube assembly (1) and bearing (11).
6
11
7
8
9
10
DIFFERENTIAL
394-1472
ASSEMBLY
0376 00-2
