TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
DISASSEMBLY - CONTINUED
6.
Remove and discard preformed packings (12 and 13)
12
from tube (1).
1
13
394-1473
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Differential lock weighs 85 lb (39 kg).
7.
Attach lifting device to cylinder assembly (9). Take up
slack on chain.
8.
Remove two bolts (14 and 15).
9.
Use lifting device to remove cylinder assembly (9).
9
10.
Remove lifting device.
14
15
394-1474
0376 00-3
