TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPAIR - CONTINUED
0379 00
DISASSEMBLY
NOTE
All front section parts must be kept with the front section and all rear section parts must be kept with the rear
section to ensure proper assembly.
1.
Use a scribe to match-mark one side of rear body (7), valve body (4), front body (5) and flange (6) to aid in installation.
2.
Remove eight nuts (1) and washers (2) from rear body (7).
CAUTION
Do not pry pump sections apart. Doing so could cause damage to the machined surfaces.
3.
Use a leather hammer to tap around seam of rear body (7) and remove rear body (7) assembly from valve body (4).
4.
Remove and discard preformed packing (3).
1
2
3
4
5
6
8
7
394-1519
5.
Remove two isolation plates (11), sealing strips (12), end separators (13) and center separator (10) from rear body (7).
Discard two sealing strips, end separators and center separator.
6.
Carefully remove pressure plate (9). Do not pry off.
7.
Remove rear drive gear (8) and rear idler gear (14).
8
9
10
11
7
14
13
394-1520
12
0379 00-2
