TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPAIR - CONTINUED
0379 00
DISASSEMBLY - CONTINUED
28.
Remove eight studs (49 and 48) from valve body (4).
29.
Position valve body (4) soft-jawed vise with flow control valve pointing upward.
NOTE
Discard parts only when told to do so. Certain parts are unavailable and inspection will be necessary to ver-
ify if part is reusable.
30.
Remove and discard two preformed packings (56) and back-up rings (55).
31.
Remove acorn nut (54).
32.
Loosen locknut (52) while holding setscrew (50).
33.
Remove seal (53), locknut (52), seal (51) and setscrew (50). Discard seal.
34.
Use snap ring pliers to remove snap ring (47). Discard snap ring.
35.
Remove orifice (57) assembly from valve body (4).
48
47
57
49
56
55
50
52
4
54
53
51
394-1527
36.
Remove cotter pin (58), nut (59) and washer (60). Discard cotter pin.
37.
Remove spring (61) and piston (62) from orifice (57).
58
59
60
61
57
62
394-1533
0379 00-6
