TM 5-3805-248-23-2
APRON ASSEMBLY REPLACEMENT - CONTINUED
0386 00
REMOVAL - CONTINUED
6.
Remove bolt (2) and washer (3) from pin (4) at bottom of apron assembly (1).
WARNING
If pin removal is difficult, slightly raise or lower hoist to relieve pressure on pin. Do not try to remove pin by
using a hammer. Failure to follow this procedure could result in injury or equipment damage. If you are
injured, seek medical aid immediately.
7.
Remove pin (4) from apron adjustment bracket.
1
APRON
3
ADJUSTMENT
2
BRACKET
4
394-1463
8.
Remove four bolts (5) and two caps (6) from ends of
apron assembly (1) arms.
1
5
6
394-1464
0386 00-3
