TM 5-3805-260-10
WARNING
Eye protection must be worn while performing the necessary tasks prior to and after
transport.
WARNING
Hearing protection must be worn whenever the engine is started.
WARNING
Use more than one person to lift parts in excess of 50 lbs, and more than two when lifting
in excess of 100 lbs.
WARNING
Fold the steps down and use whenever climbing on and off Scraper.
CAUTION
Clean all hydraulic hose dust caps, plugs, and quick disconnects immediately before
disconnecting hoses, and install dust caps and plugs immediately after.
NOTE
Preparation for helicopter transport should be done on a level and firm surface. If on soft
surface, then level areas in front and behind tires in the disassembly/assembly area for
easier drive away or drive-up.
NOTE
After removing each component, reinstall and tighten the hardware to prevent loss due to
vibration. Store all removed parts either in the tool box or as directed.
a.
Preparation for Helicopter Transport. Nine procedures are required to ready the tractor-scraper for helicopter
transport.
(1)
Removal of rollover protective structure (ROPS) with windshield. Contact Organizational maintenance.
(2)
Removal of elevator rock guard. Contact Organizational maintenance.
3-6
