TM 5-3805-260-10
CAUTION
Route
second
hose
behind hose with elbow
away from drive shaft.
(33) Connect the hose with elbow to the right side in
hitch area and the other hose to the left side.
(34) Attach hose clips to the boss at the right front
corner of the frame and to the weld stud at the
steering axle. Connect the two hydraulic hoses to
the quick disconnects on the steering axle.
(35) Remove pins (one on each side), securing the
draft frame to the bowl, using pin puller located in
tool box.
(36) Install the auxiliary fuel tank on top of the
hydraulic oil reservoir.
NOTE
Engine will not get fuel if
vent on top of auxiliary
fuel tank is not open.
3-22
