TM 5-3805-260-105.Move bracket and roller to align alternate holes inbracket.Opening at Cutting Edge1.Opening between cutting edge and elevator flightscan be adjusted from 1 inch (25 mm) to 16 inches (400mm).6.Install lower bolt and tighten upper bolt. Foradjustments over 3 inches, replace a link with a half link.2.Block elevator to keep it from moving.3.Remove bolts from elevator lower support blocks. Remove shims to decrease opening. Add shims to increaseopening. Install bolts.Smaller opening is helpful in retaining loose materials such as sand.1-35
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
