TM 5-3805-260-24
Tighten bolts (A) to a
torque of ....................... .........................18 5 lb ft (24 7 N m)
NOTE. Install swivel (B) with arrows in the direction of exhaust flow
ENGINE OIL COOLER AND FILTER
Oil pressure difference that makes the oil
filter bypass valve open 20 4 psi (140 25 kPa)
Oil pressure difference that makes the
oil cooler bypass valve open ..................18 4 psi (125 25 kPa)
(1)
9L9188 Spring (oil cooler and oil filter bypass valve)
Length under test force ...................1 70 n (43 2 mm)
Test force .............. .........................3 5 b (15 6 N)
Free length after test ......................2 28 in (57 9 mm)
Outside diameter .. .........................440 in (11 18 mm)
(2)
Oil filter bypass valve
(3)
Torque for nuts that hold oil
cooler core to oil cooler base
(hand torque only) . .........................16 2 lb ft (22 3 N m)
NOTE Assemble gasket to oil cooler base with Indexing point toward
the front of the engine and in the up position
(4)
Torque for fitting ... .........................19 4 lb ft (25 5 N m)
(5)
Torque for cap ...... .........................15 4 lb ft (20 5 N-m)
1-17
