TM 5-3805-260-24
TRANSMISSION OIL FILTER AND BYPASS VALVE
REMOVE TRANSMISSION OIL FILTER
AND BYPASS VALVE
1. Remove plug (1), the spring and bypass valve
spool.
2. Remove bolts (2).
3. Remove cover assembly (3) and element assem-
bly) (4) from the filter housing.
4. Remove nut (5), the retainer and element assem-
bly) (4) from cover assemble) (3). Remove the
O-ring seals from the cover assembly and ele-
ment assembly.
INSTALL TRANSMISSION OIL FILTER
AND BYPASS VALVE
1. Put the O-ring seal in position on cover assembly
(1).
2. Make sure stud (5) is tightened to a torque of 40
5 lb. ft. (55 7 Nm).
3. Install the O-ring seal on retainer (3).
4. Install element assembly (2), retainer (3) and nut
(4) on the cover assembly. Tighten the nut to a
torque of 10 2 lb. ft. (14 3 Nm).
5. Install the cover assembly and element assembly
in the housing and tighten-bolts (9).
6. Install valve spool (8), spring (7), the O-ring seal
and plug (6). Tighten the plug to a torque of 35
5 lb. ft. (45 7 Nm).
3-183
