TM 5-3805-260-24
TRANSMISSION OIL PUMP
DISASSEMBLE TRANSMISSION
OIL PUMP
Tools Needed
A
1P2321
Puller Assembly1
1 P463
Drive Plate
1
start by:
a) remove transmission oil pump
1. Loosen nut (I) and pull gear (2) loose with tool
(A).
2. Remove tooling (A), nut (I) and gear (2).
3. Loosen the eight bolts on the back of plate (6).
4. Remove key (3) from the shaft.
5. Remove plate assembly (5) from the pump.
6. Remove seal (4) from plate assembly (5).
7. Remove case (7) and remove O-ring seals (8) from
each side of the case.
8. Remove bolts (14) from the pump.
9. Remove spacer assembly (13), shaft (9), gear (11),
shaft (10) and gear (12) as a unit.
3-179
