TM 5-3805-260-24
DIFFERENTIAL LOCK VALVE
REMOVE AND INSTALL DIFFERENTIAL LOCK VALVE
1. Remove spring (I) from back of the differential lock pedal
(2).
2. Remove cotter pin (3) and washers (4).
3. Slide differential lock pedal (2) off of pin (5).
4. Remove nut (6) and rubber boot (7) from
Refer to page 3-283 for
differential lock valve (8).
illustration.
5. From underneath the cab area, disconnect tube
assembly (9) from elbow (10). Remove elbow (10) from
the differential lock valve (8).
6. Disconnect tube assembly (11) from elbow (12) and
remove differential lock valve. Separate elbow (12)
from valve (8).
7. To install valve, connect elbows (12) and (10) to
differential lock valve (8).
8. Connect tube assemblies (11) and (9) to elbows (10) and
(12).
9. Position differential lock valve (8) in hole in cab floor.
10. Install nut (6) with rubber boot (7).
11. Slide differential lock pedal (2) onto pin (5).
12. Install washers (4) and cotter pin (3).
13. Secure spring (1) to the back of the differential lock
pedal (2).
3-282
