TM 5-3805-260-24
BRAKE CONTROL VALVE
Disassemble And Assemble Brake Control Valve
Start By:
a. remove brake control valve
1. Remove bolt and washer (3), seat (4), retainer and gasket
(5), rubber spring (2), piston assembly (18), and spring
(6) from the body.
2. Remove seal (1) from piston assembly (18).
3. Remove ring (13), bolt (12), washer (11), diaphragm (10),
and spring (7) Remove seat (8), O-ring seal (9), spring
(15), retainer (16) and valve (17).
4. Remove seal (14) from valve (17) Check the condition of all
the seals. If any are worn or damaged, make a
replacement of the seal with a new part.
NOTE: The following steps are for the assembly of the brake
control valve.
5. Install seal (14) on valve (17) Install valve (17), retainer (16),
spring (15), O-ring seal (9), and seat (8)
6. Install spring (7), diaphragm (10), washer (11), bolt (12), and
ring (13).
7. Install seal (1) on piston assembly (18). Install spring (6),
piston assembly (18), retainer and gasket (5), seat (4),
and bolt and washer (3).
End By:
a. install brake control valve
3-279
