TM 5-3805-260-24
BRAKE QUICK RELEASE VALVE
REMOVE BRAKE QUICK
RELEASE VALVE
1.
To remove the rear cover assembly, see
REMOVE EJECTOR CYLINDER for details.
2.
Disconnect tube (1) from quick release valve
(2).
3.
Put wooden blocks from the top of the fuel tank
to just below the master cylinder.
4.
Remove four bolts (4) from the bracket and put
the master cylinder on the wooden blocks.
5.
Remove quick release valve (2) from chamber
(3).
INSTALL BRAKE QUICK
RELEASE VALVE
1.
Install quick release valve (1) on the chamber.
2.
Install four bolts (3) to the bracket and remove
the wooden blocks.
3.
Connect tube (2) to the valve.
4.
To install the rear cover assembly, see
INSTALL EJECTOR ASSEMBLY for details.
3-276
