TM 5-3805-260-24TRACTOR WHEEL ASSEMBLIES, BEARINGS AND SEALS7.Remove the outer half of the Duo-Cone floating seal (3) and the toric sealing ring retainer from the wheel assembly.NOTE: The toric sealing ring retainer must be removedevenly or damage to the retainer will result.8.Remove the rubber toric sealing ring from the metal floating ring.9.Remove the O-ring seal from the toric sealing ring retainer.10.Remove the inner bearing cone (4) from the wheel assembly.11.Remove bolts (7), locks (6) and the four plates that hold hub assembly (5) and ring gear (8) together.12.Remove hub assembly (5) from ring gear (8).13.Remove the bushing from hub assembly (5).14.Install four 3/8"-16 NC forcing screws in hub assembly (5). Tighten the forcing screws until they make contact with bearing cone (9). Tighten the forcing screws evenly to remove the bearing cone from the hub assembly.15.Remove the inner and outer bearing cups (10) from the wheel assembly.3-272
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
