TM 5-3805-260-24 TRACTOR RIM AND TIRE REMOVE TRACTOR RIM AND TIRE Tools Needed A 8S7610 Base Assembly 1 8S7650 Cylinder 1 5P3100 Pump Group 1 1. Lower the scraper and put blocks In front and behind the wheels. 2. Put tooling (A) in position and lift the machine as shown. WARNING:    Machine  can  fall  off  of  hydraulic  jack.    Put blocks under the differential housing for support. 3. Remove all but one of the nuts that hold the rim to the wheel assembly. 4. Loosen the last nut approximately 12 in. (3. 18 mm). WARNING:  The tire can  fall  off  of  the  lift  truck.  make sure the tire is fastened to the lift truck. 5. Fasten the tire to a lift truck with a chain as shown. 6. Remove the last nut that holds the tire in position.  Remove the rim and tire. of the rim and tire is 925 lb. (421 kg). INSTALL TRACTOR RIM AND TIRE Tools Needed A 8S7610 Base Assembly 1 8S7650 Cylinder 1 5P3100 Pump Group 1 1. Fasten the tire to a lift truck with a chain as shown. WARNING:  Make sure tire is fastened to the lift truck. 2. Put the rim and tire in position on the machine. 3. Install four nuts that hold the rim to the wheel assembly. 4. Remove the chain and lift truck. 5. Install the remainder of nuts (1) that hold the rim and tire to the wheel assembly. Tighten the nuts to a torque of 375 - 25 lb. ft. (510 +_ 35 N-m). 6. Remove the support blocks from under the differential housing. 7. Lower the machine to the ground. Remove tooling (A) from under the machine. 3-270 D D D ! ! !