TM 5-3805-260-24
HYDRAULIC TANK, HYDRAULIC TANK OIL FILTERS AND HOUSING
14.
Make sure the O-ring seals are in position on tube
assemblies (17) and (18). Connect the tube assemblies to
the bottom of the tank.
15.
Put panel assembly (19) in position and install the four bolts
(20), washers and nuts to hold it in position.
16.
Fill the hydraulic system with oil to the correct level. See
LUBRICATION AND MAINTENANCE GUIDE.
REMOVE HYDRAULIC TANK OIL FILTERS AND HOUSING
WARNING: Release the pressure from the
hydraulic system before any work is done.
1.
Hold the cover of valve group (1) to prevent seal damage.
Turn bolt (2) to remove valve group (1) and the filters as a
unit.
2.
Lift the hood and remove panel (3) from the hydraulic tank
and the cab.
3-266
