TM 5-3805-260-24
HYDRAULIC TANK
2.
Connect hose assembly (3) to angle assembly (2) under the
hitch and the tank.
3.
Connect two hose assemblies (4) to the back of the tank.
4.
Make sure the O-ring seal is in position in tube assembly (5)
and install the two bolts (6) and washers to hold tube
assembly (5) to the tank.
5.
Remove the two eyebolts from the top of the tank and install
two bolts (7), the washers and lockwashers that hold the
filter group in position.
6.
Install the eight bolts (8), the washers and nuts that hold the
fender and tank together.
7.
Put the air cleaner and panel assembly (9) in position on
the machine.
3-264
