TM 5-3805-260-24
BRAKE HEAD ASSEMBLIES
DISASSEMBLE BRAKE HEAD ASSEMBLIES
start by:
a)
remove brake head assemblies
1. Loosen bolts (2) that hold pins (3) in position and push pins (3)
out to remove brake linings (1).
2. Remove bolts (5) and caps (4).
3. Remove four pistons (6) and the boots from the brake head
assembly.
4. Remove the boots from the pistons and the seals from the
piston bores.
ASSEMBLE BRAKE HEAD ASSEMBLIES
Tools Needed
A
5P3569
Piston Press
1
1P495
Drive Plate
1
1. Install seals (I) in the four piston bores.
2. Install boots (2) in the piston bores with the lip of the boot in the
groove of the bore.
3-288
