TM 5-3805-260-24TOOLS NEEDEDAssemblyNumberDescriptionQuantityA2Pump Supply Line Adapter1BFlow Meter Assembly1C2Connecting Hose Assembly1C4Connecting Hose Assembly1C5Connecting Hose Assembly1D1Return Line Assembly1F3Blocking Plate Assembly1F4Blocking Plate Assembly2F5Blocking Plate Assembly1F8Blocking Plate Assembly2F149S5518 Plug a7/16"-20Thread)1F149L8493 Cap (7/16"-20 Thread)1FLOW METER INSTALLED IN ELEVATOR CIRCUIT(See Tee Test Tooling Chart for parts reference)TACHOMETER DRIVE INSTALLED(See Tee Test Tooling Chart for parts reference)FLOW METER INSTALLED IN BOWL & EJECTORCIRCUIT(See Tee Test Tooling Chart for parts reference)BLOCKING LOCATION FOR TEST OF THE PUMP(SCRAPER AND STEERING, LARGE SECTION)(Test Chart C1)(See Tee Test Tooling Chart for parts reference)1. With the engine stopped, remove the pressure in thehydraulic system. Slowly remove the cap on thehydraulic tank to release any pressure. Thentighten the cap.2. Remove the plug for the tee test from the supply line.3. Install a supply line adapter in the supply line elbow.4-35
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business