TM 5-3805-260-24SCRAPER RIM AND TIREREMOVE AND INSTALL SCRAPERRIM AND TIRETools NeededAB8S7610Base Assembly1BS7650Cylinder15P3100Pump Group18S7640Stand8S7611Tube8S7615Pin1.Lower the scraper and put blocks in front andbehind the wheels.2Put tooling (A) in the position shown and lift the3.Put tooling (B) under the scraper frame andlower the weight of the scraper on tooling (B).4.Remove tooling (A).5.Remove all but two of nuts (1) that hold the rimto the wheel assembly.6.Loosen the last two nuts approximately .125 in.(3.1 8 mm).7.Fasten the tire to a lift truck with a chain asshown.WARNING: The tire can fall off of the lifttruck. Make sure the tire is fastened to the lifttruck.8.Remove the last two nuts that hold the rim andtire in position. Remove the rim and tire. Weight fthe rim and tire is 925 lb. (421 kg).9 Fasten the rim and tire to a lift truck as shownWARNING: Make sure the tire is fastened tothe lift truck.10.Put the rim and tire in position on the wheelassembly.11.Install the nuts that hold the rim and tire.12.Remove the chain and lift truck.13.Tighten nuts (I) to a torque of 375 25Ib. ft.(510 35 N. m).14.Put tooling (A) in position and lift the scraper.15.Remove tooling (B),lower the scraper to theground and remove tooling (A).4-66
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business