TM 5-3805-260-24
Disassembly and Assembly
Steering Cylinder
8. Install cap (9) on the cylinder rod.
9. Install seal (10) and grease fitting (11).
END BY:
a)install steering cylinder
Steering Knuckles, Kingpins
And Bearings
Remove Steering Knuckles, Kingpins
And Bearings
Tools Needed
A
1P520 Driver Group
1
START BY:
a)remove wheel bearings (steer)
b)remove tie rods
1. Remove bolts (1) and cover (2) from the top of the
knuckle.
2. remove upper Dearing cup (;) from tone knuckle.
5-16
