TM 5-3805-260-24
Disassembly and Assembly
Steering Knuckles, Kingpins
And Bearings
2. Put steering knuckle (1) in position on the axle beam
assembly.
3. Put GAA Multipurpose Grease on the kingpin. Install
kingpin (2) through the knuckle and axle beam
assembly. Install and tighten bolt (3) to hold the
kingpin in position.
4. Install upper spacer (4) on the kingpin.
5. Install upper bearing (5) against the spacer.
6. Install upper cover assembly (8) and tighten four bolts
(6) and (7) to a torque of135 1 4 N-m (100
10 lb,ft. ). Tighten two bolts (9) to a torque of
270 + 20 N-m(200 15 Ib. ft. ).
7. Install lower spacer (10) on the kingpin.
5-18
