TM 5-3805-260-24
Disassembly and Assembly
DRAWBAR SPRING ASSEMBLY WITH CABLES
1.
The cables are attached to lugs on the cap
assembly (1) and clevis (2). Inspect for wear
and replace if necessary.
2.
Remove clevis (2) and nut (3) from rod
assembly (4).
3.
Remove four bolts (5) from cap assembly
(1), remove cap assembly.
4.
Rod (4) and spring (6) can now be removed
from body (7).
Any parts showing wear must be replaced.
5.
Install rod (4) and spring (6) into body.
6.
Install nut (3) and clevis (2) to rod assembly.
7.
Attach cap assembly (1) to body (7) and
install four bolts (5).
5-23
