TM 5-3805-260-24
PROBLEM
PROBABLE CAUSE
RECOMMENDED ACTION
SPRING AND CABLE ASSEMBLY
Cable breaks or releases at point of attachment during
sectionalization procedure.
1.
Cable catches on battery housing and/or fuel
tank and snaps.
2.
Pin at clevis or cap assembly breaks releases
cable.
3.
Lug at ejector or steer axle assembly breaks and
releases cable.
(a)
Replace cable.
(b)
Replace pins as necessary.
(c)
Replace lugs as necessary.
PROBLEM
PROBABLE CAUSE
RECOMMENDED ACTION
Spring assembly will not fully extend, or does not retract.
1.
Rod assembly is bent.
2.
Spring assembly body is dented.
(a)
Replace rod assembly.
(b)
Replace body.
DRAFT FRAME BEARINGS
Draft frame bearing is damaged.
Pin may have caused damage during reconnection.
Inspect pin and bearings, replace as
necessary.
5-25/(5-26 Blank)
