TORQUE CONVERTER OIL COOLER REPLACEMENT - CONTINUED
Install nipple (8), pipe coupling (9), valve body (10) and bleeder valve (11) on core assembly (4). Torque valve (11) to 8
lb-ft (11 Nm).
Install bracket (13) and two capscrews (12).
Install clamp (5) and two capscrews (6).
Install bumper (7) in clamp (5).
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Transmission oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may
Weight of torque converter oil cooler assembly is 80 lb (36 kg).
Install lifting device on torque converter oil cooler assembly.
Use lifting device to install torque converter oil cooler assembly.
Install washer (3) and capscrews (1 and 2).
Remove lifting device.
END OF WORK PACKAGE
0134 00-3/(-4 blank)