TM 5-3805-260-24
STEERING COLUMN
14. Remove bearing (19) from the bottom of the
column (14).
INSTALL STEERING COLUMN
Tools Needed
A
B
1P510
Driver Group
1
1P2852
Spanner Wrench
1
I. Install the bearing with tooling (A) in the bottom of
column (I).
2. Install column (I) in the cab. Install shaft (2) in the
column. Lower the column as far as possible.
3. Turn stop (3) on to the column. Install key (4) and
lever (5) on the end of the shaft.
4.
Install the washer and bolt (6) to the end of the
shaft. Install the wire through bolt (6) and around
shaft as shown.
3-343