ELEVATOR SPEED SELECTOR VALVE
Put elbow (14) in position and install nut (13). Connect a hose to
each end of the elbow.
Connect hose (12) to the fitting on the support angle.
Connect hoses (15) and (17) to their fittings. Connect electrical
Install two bolts (18) to the hose on the hitch. Connect three
hoses (19) to the tubes on the hitch.
On the elevator control valve, connect lines (20) to the valve.
Connect hoses (21) to the support angle.
Connect hose (22) to the elbow.
Fill hydraulic tank with specified hydraulic oil to correct level.