--KEY--
EXPECTED TEMPERATURES
INTERVALS
CAPACITIES
+40 to -65F
+40 to -15F
Above +15F
(+4 to -54C)
(44 to -26C)
(Above -9C)
OE/HDO
LUBRICATING OIL,
D-Daily
(MIL-L-2104) Internal Combustion
M-Monthly or
Engine Tactical Service
33 hours of oper-
OEA
LUBRICATING OIL,
ation, whichever
OEA
OE/HDO-10
OE/HDO-30
(MIL-L-46167) Internal Combustion
occurs first.
Engine Artic
Q-Quarterly
Engine Crankcase, add Refill 22 qts (20.812 L)
(3 months) or
Dry 30 qts (28.380 L)
4 additional quarts
100 hours of oper-
(3.785 L) for filters
ation, whichever
occurs first.
3.5 qts (3.312 L)
Winch
,
S-Semiannually
Refill 50 qts (47.300 L)
Transmission, Steer
(6 months) or
Dry 78 qts (73.815 L)
Unit, Transfer Case,
200 hours of oper-
Oil Cooler and Lines
OEA
OE/HDO-10
OE/HDO-10
ation, whichever
Refill 108 qts (102.206 L)
Hydraulic Tank
occurs first.
Dry 128 qts (121.133 L)
A-Annually
4 qts (3.785 L)
Hydraulic Tank Return
(12 months) or
Line Filter
400 hours of oper-
ation, whichever
LUBRICATING OIL,
GO
GO-80/90
GO-75
GO-85/140
occurs first.
(MIL-L-2105) Gear, Multi-purpose
OC-On-condition.
GO-80/90
8 qts each (7.571 L)
Final Drives (2)
GAA
GREASE, Automotive
ALL
TEMPERATURES
(MIL-G-10924) and Artillery
Roadwheel
GAA
GAA
GAA
Hub Bearing
CMD
Molybdenum
ALL
TEMPERATURES
(MIL-G-21164) Disulfide
Hatch Hinge Assembly
GMD
GMD
GMD
LUBRICATING OIL,
PL
(Medium
General Purpose
PL-S
PL-S
PL-M
(MIL-L-3150)
Special
Special
Medium
(special
Oil Can Points
VV-L-800)
SD-2
SOLVENT, Drycleaning
ALL TEMPERATURES
(P-D-680)
EXPECTED TEMPERATURES
,
(MIL-G-18458) GREASE, Wire Rope
ALL TEMPERATURES
and Exposed Gear
Grease, Wire
Grease, Wire
WINCH CABLE
Grease, Wire
Rope and
Rope and
Rope and
and Drum
Exposed Gear
Exposed Gear
Exposed Gear
FUEL REQUIREMENT'S TEMPERATURE LIMITS (VV-F-800)
TOTAL MAN-HOURS
TOTAL MAN-HOURS
Grade DF-2 Fuel For use above +10F (-12C)*
Grade DF-1** For use below +10F (-12C) to above -20F (-29C)
INTERVAL MAN-HOURS
INTERVAL MAN-HOURS
Grade DF-A
For use below -20F (-29C)
Grade JP8
For use above -60F (-51C)
2.8
S
D
0.3
* Usage temperature may vary dependent on the cloud point of
1.0
A
4.6
M
the actual DF-2 fuel being supplied in the geographical area
** DF-1 is not normally procured in CONUS or OCONUS
3.7
OC
1.0
Q
Refineries will blend DF-2 with kerosene to meet temperature
requirements of DF-1.
If OEA lubricant is required to meet the temperature ranges specified in key, OEA is to be used in
GENERAL NOTE 1
all places where OE/HDO-10 is specified.
The use of OE/HDO 15W-40 in lieu of OE/HDO-30 is authorized. The OE/HDO 15W-40 can be
GENERAL NOTE 2
used at all temperatures above 5F (-15C) for all components except the transmission, transfer
case, steer unit and final drives.
LO 5-2350-262-12
Card 2 of 28
