DAILY NOTES (CONTINUED)
Note 1
ENGINE CRANKCASE
Access through intake grilles (TM 5-2350-262-10).
A
Check oil level before starting engine
B
Level should be between low (L) and high (H) marks
on gage (1).
C
Add or drain OE/HDO or OEA as required. To add oil,
remove filler cap (2) from rocker cover. Install cap (2)
when done filling oil.
D
Take oil samples every 30 days. Refer to TB 43-0210
for sampling requirements and card 3 for oil sampling
procedures.
Note 2
HYDRAULIC TANK
Note
.
Take oil sample (card 3) five days prior to annual
lubrication. Submit oil sample to AOAP laboratory.
Change oil only as directed by AOAP laboratory.
.
C h e c k hydraulic oil level with ejector retracted
(back), apron down, and hydraulic pressure
relieved.
Access through operator's hatch (TM 5-2350-262-10).
A
Check oil level on gage (1).
B
Oil level should be within the FULL marks.
C
Add or drain OE/HDO-l0 or OEA, as required. Add oil
through either the primary fill point (2) or optional fill
point (3).
LO 5-2350-262-12
Card 5 of 28
