MWO 5-2350-262-35-1
COVER 12476192
CABLE 12481025
BASE PLATE
12476249
STRAIGHT ADAPTER
HOSE 12476191-3
4FBTX-SS
HOSE 12476191-1
SHEATH
K9190606-4-4-4C-30
90 ELBOW
45 ELBOW 8-8 140339
2102-8-8
NOZZLES 10250
SECTION VII. INSTALLATION PROCEDURES FOR DRY POWDER (ALL
VEHICLES)
a.
Install dry powder fire extinguisher hoses and fittings per TM 5-2350-262-20-1.
b.
Install dry powder fire extinguisher control valve and cable per TM 5-2350-262-20-1 and TM 5-2350-262-
20-2. Use new straight adapter, actuator cover, actuator assemblies, base plate, cable, and sheath
identified in Figures 3-3 and 3-5 above. Ensure actuator assemblies 15048 are replaced with new ones
supplied.
c.
Ensure cable is installed up through actuator arm and over arm, then down through base plate, seating
cable ball end in bottom of actuator arm.
d.
If in serviceable condition, reuse access cover 12355423 and fire extinguisher handles 7968260.
e.
Install dry powder fire extinguisher cylinder and clamps per TM 5-2350-262-20-1.
3-7/(3-8 blank)
