MWO 5-2350-262-35-2
NOTE
Step 9 below applies to Figure 2-19.
9. Install the access cover (12475724) (1) on the MCU base bracket (6) with the angled and open end facing the
left side of the vehicle using four cap screws (B1821BH038C150N) (2), hex nuts (12387305-9) (3) and lock
washers (12387272-46) (4) and eight flat washers (12387279-14) (5).
1
6
2, 3, 4, 5
NOTE
Step 10 below applies to Figure 2-20.
10. Install the coolant umbilical guard (12475737) (4) to the left outside of the radio equipment case (1) behind
the driver's compartment with three flat washers (MS27183-18) (2) and machine bolts (B1821BH050C125L)
(3).
1
2, 3
4
LEFT OUTSIDE
OF VEHICLE
11. Re-connect the negative battery ground cable per TM 5-2350-262-20-1.
2-16
