Figure 2-14. MCU Power Lead Routing from Driver's Compartment to Engine Terminal.

MWO 5-2350-262-35-2

NOTE

Step 3 below applies to Figure 2-13.

3. Continue routing the MCU Power Lead (12491611-2) (2) forward, behind the instrument panels and out the

lower front hole (1) of the driver's compartment.

Figure 2-13. MCU Power

Lead Routing from Circuit

Breaker to Lower Front of Driver's Compartment.

NOTE

Step 4 below applies to Figure 2-14.

4. Route the MCU Power Lead (12491611-2) (2) along the existing wire harness (3). Use 5 or 6 Electrical Tie

Straps (MS 3367-2-0) (4) to connect the MCU Power Lead (12491611-2) (2) to the existing Wiring Harness

(3) on the front and right outside of the driver's compartment. Connect the MCU Power Lead (12491611-2)

(2) end to the end of the MCU Power Lead (12491611-1) (1) on the right outside of the driver's compartment

inside the engine compartment.

Figure 2-14. MCU Power Lead Routing from Driver's Compartment to Engine Terminal.

2-12