TM 5-2350-262-20-3
LEFT FRONT BUMP
STOP SHOWN
VISUAL INSPECTION
Remove bump stop access panels from hull on inoperative side of vehicle, and check hydraulic
lines at circuits 9 (1) and 11 (2) between bump stop cylinder (3) and forward manifold (4).
5
7
6
3
LEFT FRONT BUMP
STOP SHOWN
MECHANICAL BINDING CHECK
Clear debris from area of bump stop (5).
Start engine and allow to run for at least two minutes to build up hydraulic pressure.
Have assistant shift SPRUNG/UNSPRUNG lever to SPRUNG, then to UNSPRUNG.
Repeat several times. Check for free movement of bump stop cylinder (3). Check for
missing or damaged components including cylinder rod (6), cylinder rod connecting pin (7),
and bump stop (5).
Refer to TM 5-2350-262-20-2
3-45
