TM 5-2350-262-20-3
LEFT FRONT BUMP
STOP SHOWN
BUMP STOP CIRCUIT TEST
NOTE
Have suitable container ready to catch oil.
Stop engine; relieve hydraulic pressure. Disconnect BUMP STOP CYL-9 hose (1) from
elbow (2) on bump stop cylinder (3), and cap elbow (2). Connect pressure measuring
device (4) to BUMP STOP CYL-9 hose (1).
Start engine, place vehicle in SPRUNG mode, and read pressure measuring device (4).
FORWARD MANIFOLD PRESSURE TEST
NOTE
Have suitable container ready to catch oil.
Stop engine; relieve hydraulic pressure. Remove measuring device (4) and connect hose
(1).
Disconnect FWD MANF-9 ELB hose (5) from elbow (6) on forward manifold (7), and plug
hose (5). Connect pressure measuring device (4) to elbow (6).
Start engine and read pressure measuring device (4).
Stop engine; relieve hydraulic pressure. Remove all test equipment and connect hose.
3-47