TM 5-2350-262-20-3
EJECTOR CONTROL VALVE
EJECTOR CONTROL VALVE ADJUSTMENT
With engine still at idle speed and EJECTOR CONTROL lever in FORWARD position,
loosen jamnut (1) on ejector control valve and turn adjusting screw (2) clockwise to
increase pressure; counterclockwise to decrease pressure. Pressure should be 1,950-
2,050 psi (13,445-14,135 kPa).
Stop engine; relieve hydraulic pressure. Remove all test equipment and connect
hoses.
Refer to TM 5-2350-262-20-2.
3-81
