TM 5-2350-377-13&P
FIELD MAINTENANCE
CONTROL BOX WIRING HARNESS REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
TB 43-0001-39 Series
Tool Kit, General Mechanic's: Automotive
(WP 0071, Table 1, Item 7)
Shop Equipment, Field Basic
Equipment Condition
(WP 0071, Table 1, Item 5)
Front of vehicle blocked (TM 5-2350-262-20)
Hydraulic system pressure relieved
(TM 5-2350-262-20)
Personnel Required
Construction Equipment Repairer, 91L
REMOVAL
NOTE
Refer to TB 43-0001-39 Series for all wiring harnesses not shown for Replacement task.
1.
Remove four screws (Figure 1, Item 1) and cover (Figure 1, Item 2) from body assembly (Figure 1, Item 9) and
retain for future use.
2.
Disconnect connector (Figure 1, Item 4) on control box harness (Figure 1, Item 5) from connector
(Figure 1, Item 7) on control box harness (Figure 1, Item 8).
3.
Remove control box harness connector (Figure 1, Item 6) and control box connector (Figure 1, Item 10) from
control box assembly (Figure 1, Item 9).
4.
Remove ten screws (Figure 1, Item 3) and control box harness contacts (Figure 1, Item 5) from cover
(Figure 1, Item 2) and retain screws for future use.
1
2
2
10
9
8
6
5
3
7
4
M0105HBF
Figure 1. Control Box Harnesses Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00022)