TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
Draft Frame, f. On each side of bowl, inspect draft
44
After
arm wear plate and mounting hard-
(Con't)
Scraper
ware for presence and general con-
Bowl, Eleva-
dition. Ensure there is clearance
tor, and
between wear plate and scraper
Ejector
bowl.
DRAFT
ARM
SCRAPER
BOWL
WEAR
PLATE
g. Check left and right bowl lift cylin- g. Class III leaks are evi-
dent. Loose or missing
ders, hoses, lines, and fittings for
mounting hardware is
damage or signs of leaking and
noted.
secure mounting.
NOTE
If scraper bowl cutting edge or side router bits are worn or
damaged, or if cutting edge configuration needs to be changed
in order to accomplish the next scheduled mission, notify Unit
Maintenance.
Obtain appropriate measuring device from Unit Maintenance,
to measure cutting edge wear in step g and router bit wear in
step h.
0014 00-30
