TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
NOTE
When new cutting edge dimension, as indicated
ON illustration, is approximately 1.5 in. (38
mm).
Draft Frame, h. Inspect cutting edge for excessive h. Worn to 3/4 in. (19 mm)
44
After
or less, damage or loose-
wear, cracks, breaks, and loose or
(Con't)
Scraper
ness is evident.
missing mounting hardware. If
Bowl, Eleva-
worn to 3/4 in. (19 mm) or less, or if
tor, and
damage or loose mounting hard-
Ejector
ware is noted, notify Unit Mainte-
nance to rotate or replace cutting
edge or tighten mounting hardware.
CUTTING
EDGE
1.5 IN.
(38 MM)
(NEW)
0014 00-31