TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
NOTE
73
After
Hydraulic
Oil Cooler
If there is an accumulation of debris at hydraulic oil cooler
and Radiator
and radiator, engine grille must be removed to allow a thor-
ough cleaning. Notify Unit Maintenance.
Visually check oil cooler and radia- Damage that would impair
tor for signs of leakage or damage.
operation is evident.
WARNING
74
After
0.5 Hours Hitch and
Steering
Hitch and steering movement can reduce clearances sud-
Linkage
denly and cause personnel injury. Always stop engine
BEFORE working in area of hitch link.
NOTE
Park machine on level ground, with parking brake applied,
transmission in N (Neutral) and locked, bowl lowered to the
ground, wheels blocked, and engine off.
If any remote lubrication lines are damaged, notify Unit
Maintenance. These lines must be filled with grease.
a. Apply GAA grease (Item 10, WP
hitch pin grease fittings, mounted
on top of transmission.
b. Apply GAA grease (Item 10, WP
ing grease fittings.
GAA
GAA
(REMOTE
HORIZONTAL
GREASE
HITCH PIN
FITTING)
REMOTE
LUBRICATION
LINE
390-983
0014 00-52
