TM 5-3800-205-10-1
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0017 00
MACHINE ASSEMBLY - CONTINUED
38.
Install three guard plates:
a.
Remove guard plate mounting bolts and washers from left side of tractor frame. Loosen bolts and washers on
right side of frame.
NOTE
Slotted side of plates mount to right side of tractor frame.
b.
With assistance, raise guard plate into position. Push guard plate so that slots in plate engage under washers
and bolts. Install three washers and bolts on left side and fully tighten all six washers and bolts.
c.
Repeat step b to install two remaining guard plates.
FRONT
GUARD PLATE
BOLTS ON
SLOTTED SIDE
MIDDLE
GUARD PLATE
REAR
GUARD PLATE
390-1024
39.
Machine is now fully assembled and operational.
NOTE
It is important to stow components in container in accordance with indicated sequence. This will ensure
efficient and timely packing of container.
40.
Stow the following items in ISU-60 container in accordance with illustrations and information in Tables 7 and 8.
a.
four steering cylinder locking collar assemblies, two short (6 5/8 in.) and two long (10 3/4 in.);
b.
two hitch locking blocks;
c.
exhaust extension;
d.
auxiliary fuel tank, four ratchet straps, and fuel hose assembly;
e.
fuel jumper hose assembly (stow in toolbox);
f.
toolbox;
0017 00-62
