TM 5-3800-205-10-1
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0017 00
MACHINE ASSEMBLY - CONTINUED
FRAME
STEERING CYLINDER LOCKING
COLLAR ASSEMBLIES
LOCKING BLOCKS
EXHAUST
EXTENSION
HAZMAT
ACCESS
DOOR
TOOLBOX
AUXILIARY FUEL
TANK AND HOSE
ASSEMBLY
TRAY
RETAINING
PIN
390-1119
Table 7. Stowage Instructions for ISU-60 Container - Single-Door End.
COMPONENT
STOWAGE INSTRUCTIONS
1.
Place hitch locking blocks in front cutouts of cushion pad, on left side of shelf.
Hitch Locking Blocks,
2.
Place steering cylinder locking collar assemblies in two right cutouts in cushion
Steering Cylinder
pad, on left side of shelf.
Locking Collar Assem-
3.
Place exhaust extension in left cutout in cushion pad, on left side of shelf.
blies, and Exhaust
4.
Secure with three straps.
Extension
Toolbox
1.
Place toolbox on front edge of tray.
2.
Secure with three straps.
3.
Slide tray all the way in.
4.
Secure tray with two pins through tray and container floor.
Ramps
1.
Position each ramp against right wall of container.
2.
Secure each ramp with strap.
Auxiliary Fuel Tank
1.
Place auxiliary fuel tank just inside HAZMAT access door.
2.
Secure with two straps.
3.
Stow four ratchet straps.
CAUTION
Check to ensure all components are securely fastened prior to closing and
securing door. Failure to do so may result in damage to equipment.
0017 00-63
