TM 5-3800-205-10-1
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0019 00
CONFIGURE MACHINE FOR AIRDROP - CONTINUED
CAUTION
Do NOT deliver container by airdrop. Failure to follow this caution will damage container and its contents.
31.
Transport ISU-60 container inside aircraft (NOT on air delivery platform) OR arrange for transport by some other
means. Container is not air-droppable.
RETURN MACHINE TO OPERATIONAL CONFIGURATION
NOTE
Whenever hydraulic hose quick disconnects need to be disconnected, operate control levers through all
positions (WP 0004 00) to relieve any trapped hydraulic pressure in hoses. This will facilitate discon-
nection of hoses.
Tools required for machine assembly are located in BII toolbox on rear deck of scraper.
1.
Remove parachute rigging and tie downs from machine. Remove all blocking and shoring material.
2.
Remove machine from airdrop platform. Block tractor and scraper wheels.
3.
Remove tape from all lights. Remove tape from exhaust extension.
4.
Remove 54 in. pry bar from stowage on rear deck of scraper.
5.
Start tractor engine and inflate all tires to 45 psi (310 kPa), using pneumatic tire inflation hose assembly (Item 10, Table
2, WP 0024 00) connected to air chuck quick disconnect on right side of tractor, at rear of hood.
TIRE INFLATION
HOSE ASSEMBLY
AIR CHUCK
QUICK DISCONNECT
0019 00-28