TM 5-3800-205-10-1
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0019 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
If ISU-60 container has not been delivered to site of machine assembly, performance of certain steps will
need to be delayed until container arrives. Proceed with assembly of machine, returning to these steps as
soon as container is available.
6.
Place ISU-60 container near work area and remove the following items from container, in accordance with illustrations
and information in Table 3:
NOTE
Container center post must be removed to remove ladder. Remove retainer and post.
a.
ladder;
b.
torque wrench;
CENTER POST
TORQUE WRENCH
RETAINER
LADDER
390-1118
CONTAINER CENTER POST
0019 00-29
