TM 5-3800-205-10-1
RAIL TRANSPORT - CONTINUED
0021 00
CONFIGURE MACHINE FOR RAIL TRANSPORT
NOTE
Whenever hydraulic hose quick disconnects need to be disconnected, operate control levers through all posi-
tions (WP 0004 00) to relieve any trapped hydraulic pressure in hoses. This will facilitate disconnection of
hoses.
1.
Position scraper on level ground, in railhead staging area and in line with railhead. Ensure tractor and scraper are aligned
and steering wheel is centered. Move ejector fully to the rear and close floor of bowl.
2.
Place ISU-60 container in railhead staging area and remove the following items from container:
a.
toolbox;
b.
exhaust extension (OCONUS ONLY);
c.
four steering locking collar assemblies, two short (6 5/8 in.) and two long (10 3/4 in.);
NOTE
Before removing ladder, remove center post retainer and center post.
d.
ladder (OCONUS ONLY); and
e.
pry bar (OCONUS ONLY).
STEERING CYLINDER
CENTER POST
EXTENSION
LOCKING COLLAR ASSEMBLIES
PRY BAR
RETAINER
LADDER
390-1119
TOOLBOX
390-1118
CONTAINER CENTER POST
0021 00-4
